Senco siding nailer gives you an overall solution to all your needs. Siding nailers weigh an average of 5 pounds, which is lower than other types of nailers. The fastener length also needs to be between 1-¼ to 2-½ inches. Let us dig deeper to understand the features through our Senco siding nailer review.
One of the Best Senco Siding Nailers Review
Senco SCN49 Coil Siding Nailer
When you are on the lookout for tools that are easy to go, Senco Siding Nailer is a great choice. Let’s take a closer look at the instrument.
Build Quality
Checking the build quality of a tool should be your first criterion. You wouldn’t want to change your tool every few months. Luckily, the Senco Siding nailer has durable aluminum as housing material. It is capable of withstanding the wear & tear suffered from any project site.
Weight
Another nice thing about aluminum construction is that the material makes the object lightweight. Senco siding nailer is endowed with the same feature of using aluminum as a housing material. It weighs 5.1 lbs. For a siding nailer, that’s on the average side.
Fasteners Size
You would want some variation with the nail size for the nailer. You never know what type of length you may need for siding jobs. Senco Siding Nailer is compatible with 15-degree nails. The fasteners’ size ranges from 1-¼ to 2-½ inches.
The nailer is compatible with Smooth, Ring, Screw shank types. The diameter for the fasteners is .082 to .092 inches.
Mode of Operation
There are two modes of operation available for the Senco Siding Nailer. At first, you can use the contact mode. The trigger is pulled before the tip being set to the surface. When the trigger is pressed, the nail drives in. This mode continuously fires nails as you contact the tip against the surface.
The sequential firing mode allows you to drive single shots to the surface. You need to press the safety tip & then pull the trigger to release the fastener. Release the trigger & repeat the same to drive another nail. This is considered to be safe mode.
Depth Adjustment
Senco Siding Nailer provides depth adjustment to the users. Interestingly, this allows the users to have full authority over the nailer. You can adjust the drive depth depending on the length of the nail & project needs.
Magazine Size
Senco has a magazine capacity of 250-375 nails. Since the nails are pretty small, you should have a nail capacity of around 300 for your nailer. With a maximum 375 nail capacity, you would have to reload much more minor, saving you time.
Operational Pressure
There is great confusion among users about operational pressure for nailers. The straightforward thing is that the more the pressure, the better the driving force for the nail. But for siding tasks, you need around 100 PSI of pressure. Senco gives you an operational pressure of 70 to 120 PSI.
Collation
The Senco SCN49 Coil Siding Nailer accepts both Wire and plastic sheet collations.
Other Features
The tip or nose of the nailer is designed in a way that prevents any damage or marks on the surface. The clear magazine allows you to see the remaining nails. Thus, this minimizes the chance of firing blanks.
Warranty
A 5-year limited warranty backs Senco SCN49 Coil Siding Nailer. This proves how confident the manufacturers are about the tool. If you have any problem, they will give you their full service.
Drawbacks
You might experience some jamming & misfiring issues while using the nailer. Multi-directional exhaust is missing from the tool. As a pneumatic tool, the multi-directional exhaust comes in handy to direct the air from the user.
Frequently Asked Questions
1. Can the Senco SCN49 be used as a framing nailer?
Using the Senco SCN49 as a framing nailer is not a good option. Framing nailers require a mail size of around 3 to 3 ½ inches. But the Senco SCN49 has a maximum nail size of 2 ½ inches.
2. What kind of nailer settings are suitable for Hardie board siding?
Hardie boards may consist of various materials such as cement, sand, and cellulose fibers. So an easily adjustable depth setting would work well for you. You can adjust the depth according to the project needs.
3. What is needed to operate the Senco SCN49 besides the nailer itself?
Besides the power tool, you need an air compressor to operate the device. So make sure you also see an air compressor compatible with the tool.
Conclusion
Senco designs its tools with the users in mind. The SCN49 is engineered so that we can get our job done quickly & easily. You can use the sequential firing mode if you want a more safe operation. Overall the Senco siding nailer review gives you a straightforward idea of what Senco offers to its customers.
Leave a Reply