If a year goes by, 8 million houses are built on Hardie siding, as the US government says, there must be something good about Hardie siding, right? People tend to lean towards Hardie siding for resilience, the durability of cement and wood fibers, resistance to bugs, and not having the hassle to change up to long term.
And for that, the nail gun of the Bostitch Coil Siding Nailer could be a good choice due to its adjustable depths. The Freeman PCN65 Pneumatic coil siding nailer is an excellent choice for safe and comfortable use due to its 360-degree adjustable exhaust and precautionary lock.
Using Nail Guns at it’s Best
The best nail gun for Hardie siding should be best at what it does. You should be looking for a couple of things while choosing one, such as adjustable tool-free exhaust, the flexibility of both plastic and wire-led nails. A quick and straightforward push-button reloading system makes the firing experience easy.
You get everything in the products we brought for you. Just have a look.
1. BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)
Stanley- Bostitch produces first-class, innovative clipping tools for commercial, constructive, and home renovation tools. This Bostitch Coil Siding Nailer is a 15 Degree Coil Siding Nailer used for weld wires and plastic-inserted coil nails. This lightweight tool has an aluminum cover.
You can adjust the penetration of the nails. Due to the soft rubber foot, you can use it on a variety of siding materials. The Bostitch (N66C) Coil Siding Nailer works with any air-hydraulics and has been mechanized in a way that the exhausted air will be deviated away from you while using it.
- Made up of aluminum; very lightweight
- Adjustable Depths
- It can be used for well-wires and plastic-inserted coil nails
- It has a soft rubber foot; can be used in both hard and soft materials
This Bostitch Coil Siding Nailer has some of its inadequacy. A few of our customers claimed that they were a bit unsatisfied with its finishing. The reason is straight- the depth issue. One-fourth of the extensive nails were found to be not getting inside the wood completely until hammered. Whereas some had problems with controlling the power of the machine, other than that, it’s a good choice for your Hardie sidings.
2. Freeman PCN65 Pneumatic 15 Degree 2-1/2″ Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black
Freeman PCN65 Pneumatic 15 Degree 2-½” Coil Siding Nailer does well on roofing materials, wall coatings, fencing, and siding, and it is the best choice for 13-14 gauge plastic, or wire collated siding nails from 1-1/4″ to 2-1/2″ with its 15-degree compatibility.
Its durability is complemented by an indurated piece of steel drive blade and a lamented aluminum cylinder. It has a precautionary lock preventing any accidental firing of the nails.
It has an ergonomic grip that doesn’t let you have discomfort while using. And it comes with an anti-dust cap. The cap secures the cleanliness of the gadget’s interior from any kind of debris.
It has a 360-degree adjustable exhaust to direct the air away from your face while working. Provides a side load magazine and a see-through bucket to keep a check on the tools inside. Lastly, this gadget comes with a set of safety goggles, a belt anchor, air tool oil, and air connector, and accommodation tools.
- Light-weighed and tends to have a standard longevity
- Finger-depth adjustment tool to very easily and quickly alter the depth of the nails
- A no-mar precautionary tip for bringing zero damage to the working surface
Customers found the driving of the nails a little bit incompatible and quite a lot uneven. They had to gun the pins twice sometimes.
3. Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Sideload, Tilt Bottom Magazine (NV65AH2)
Metabo HPT Coil Siding Nailer adapts 16-degree wire accumulated coil siding nails ranging from 1-1/2″ to 2-1/2″ and accepts 15-degree plastic collated coil siding nails ranging from 1-1/2″ to 2-1/4″.
The Metabo HPT NV65AH2 comes with an air compressor tank and air tool oil. It comes with selective actuation enabling you to transfer modes between the consequent nailing and contact nailing by merely turning a switch over.
It has a side load with a leaned bottom magazine that would enable a swift and trouble-free load. This gadget can drive tools like wire and plastic sheet-covered siding nails for surplus pliability. It has a no-mar nose cap for ensuring the safety of the material this machine would be used in.
A tool-less depth adjustment system of virtuous depth is dedicated to the diverse requisition. It has a proficient air deflector to divert the exhausted air away. It has plastic sheet protection to avoid the collation of wire and comes with a five-year professional warranty!
- Both 15 and 16 degrees, wire and plastic, collated siding nails
- Drives wire and plastic folio collated siding nails
- Plastic shelter and a no-mar nose cap
It gets jammed quite often. Recoiling the jammed nails was found to be time-consuming for the customers.
4. HBT HBCN65P 15 Degree Coil Siding Nailer with Magnesium Housing, 1-1/4-Inch to 2-1/2-Inch Plastic/Wire Collated Coil Siding Nails
The HBT HBCN65P 15 Degree Coil Siding Nailer due to its magnesium housing, is very light-weighted. This model of Coil Siding Nailer acquires 15-degree wire collated, and plastic sheet collated coil nails from 1-1/4″ to 2-1/2″ in length.
Jamming can quickly be restored due to the disclosed nose guide. This gadget also has a switch to change its working modes. You can either use continuous fire or use contact fire accordingly by just flipping a switch!
This HBT HBCN65P 15 Degree Coil Siding Nailer is a tool-free depth adjustment nail equipment so that you can adjust your preferred tools according to your needs, that too very rapidly and comfortably.
It consists of a 360-degree convertible exhaust to deflect the exhausted air away from you while working with it. Lastly, this model has an axle air plug that diminishes the twisting of the pipe for better control over your working zone.
- It has a magnesium housing which keeps it light-weighted, so not much troublesome while working for an entire day.
- Switching modes are more accessible; it’s just about a flip
- Jamming can be very easily and quickly undone
- Adjustments are easier with 360-degree air exhaust and a swivel air plug.
The machines get tired. No other drawbacks are precisely to be mentioned.
Frequently Asked Questions
How will I know the compressor size is right for me or not?
In most cases, for short bursts, the compressor provided is more than enough.
Do I need a finishing trailer to install a Hardie one?
Yes, to install, you need a finishing unit.
What nailer is needed for Hardie siding?
It should be 70 to 120 PSI.
Hardie siding makes your house look pretty. As easy it may seem, Hardie siding needs more precision than the typical DYI works. So, look for the best brands as they never fail to impress. If you want to experience the unique features, analyze the details and go for one from the list. Try to go with a standard lightweight for easy steering.
You have all the details you need. Choose one and go siding!
Leave a Reply